Skip to content

All You Need to Know About The Edelrid Ohmega

Videos
1 1 102 1

Suggested topics


  • That’s not for belaying!

    Videos climbing hownot2
    1
    0 Votes
    1 Posts
    3 Views
    HowNOT2H
    https://www.youtube.com/watch?v=H2KMDtkOpVA
  • If you don't climb it, its OVER

    Videos climbing
    1
    0 Votes
    1 Posts
    10 Views
    EpicTVE
    https://www.youtube.com/watch?v=IC_x7mpe7us
  • The Line: A Climb for Kei Taniguchi

    General News climbing
    1
    0 Votes
    1 Posts
    55 Views
    American Alpine ClubA
    In 2009, Kei Taniguchi from Japan became the first woman to win a Piolet d’Or (along with climbing partner Kazyua Hiraide) for a new route up 7,756-meter Kamet in India. Tragically, neither Taniguchi nor Hiraide are still with us. In AAJ 2025, we’re publishing a story by Akihiro Oishi, Taniguchi’s biographer, who set out to complete a route she had attempted years earlier in Nepal. We’re sharing part of Oishi’s story here. “Mr. Hagiwara, what mountain is this?” The question was asked by Kei Taniguchi as she looked at a picture taken by Hiroshi Hagiwara, editor of Rock and Snow, in 2013. The photo showed the unclimbed northeast face of Pandra (6,673 meters) in eastern Nepal. In 2016, Taniguchi attempted Pandra with Junji Wada, retreating from two-thirds height (AAJ 2017). On return to Japan she wrote, “I’ve opened Pandora’s Box. I will definitely go back to check what’s inside.” Tragically, a month later, she fell to her death from Mt. Kurodake in Japan. I interviewed many people to compile a book about Kei’s life, called A Piece of the Sun. In the final chapter, I hoped to incorporate a scene in which some of us, including Wada, climbed Pandra. However, Wada was seriously injured just before our team was due to leave Japan, and the expedition was postponed. Finally, in 2024, eight years after Kei’s accident, I went to Pandra with Suguru Takayanagi and Hiroki Suzuki to complete Kei’s route. Wada had become a family man, starting a new life. We arrived at our 5,100-meter base camp on October 12. The approach to advanced base and the face itself had changed significantly in eight years due to global warming: The northeast face looked far drier than in pictures taken by the French team that completed the first route up the face. [In October 2017, one year after the attempt by Taniguchi and Wada, French climbers Mathieu Détrie, Pierre Labbre, and Benjamin Védrines completed Peine Plancher (1,200m, WI6 M6; see AAJ 2018).] After acclimatization, we left advanced base for Pandra at 7 a.m. on October 25. It took three hours to reach the foot of the wall, after which we climbed to a bivouac site at 5,500 meters, where we pitched the tent using a snow hammock. The climbing to this point, following the line taken by Taniguchi and Wada, had involved crumbling rock and brittle ice. On day two, we climbed three pitches of excellent, steep alpine ice, dubbed the Pandra Great Icicle. Above, a couloir with poor protection and belays cut through the center of the face, and at 5,800 meters we made our second bivouac. On the 27th, we headed directly toward the summit. [From around this point or below, in 2016, Taniguchi and Wada traversed to the north spur; the 2024 team continued direct and joined the line of the 2017 French route, which came in from the left.] At around 6,000 meters, the French party had found a pitch of M6. Takayanagi, who is about ten years younger than us, onsighted that pitch easily—he should achieve great things in the Himalaya. At 6,200 meters, we found a bivouac site beneath a rock outcrop. The next morning, we left our bivouac gear and headed for the top. Takayanagi climbed an overhang that was much more difficult than the M6 the day before. We then climbed ice and difficult sugar snow, with little meaningful protection, to reach a snow cave at around 6,500 meters after dark. We shivered through the night in just the clothes we were wearing. With Suzuki in the lead, it took only 30 minutes to reach the top the next morning. Suzuki shouted, “Whoa, we did it!” I’ve been climbing with him for 20 years, but this was the first time I’d heard a serious roar. By 4 p.m. we had returned to our snow cave, and the following day we rappelled to the base. We named our route A Piece of the Sun. It will continue to burn in our hearts and guide us toward greater mountains.                   —Akihiro Oishi, Japan, with help from Kaoru Wada, Hiroshi Hagiwara, and Rodolphe Popier 2004 Taniguchi and Kazuya Hiraide complete a https://americanalpineclub.org/news/2025/8/12/the-line
  • Guidebook XV—Policy Spotlight

    General News climbing
    1
    0 Votes
    1 Posts
    64 Views
    American Alpine ClubA
    Consider the following true story: It’s the mid-2000s and two friends are on a long, multi-pitch sport climb. They’re excited—it is the climbing vacation to paradise they’ve dreamt about. They’ve been on clean, hard limestone all week. They’re prepared and plenty experienced for this climb. The leader has reached a belay stance and is getting ready to bring up their partner. They are building an anchor on two shiny new bolts. As the leader flakes the rope, they see the first bolt on the next pitch is close, and they decide to clip the rope into it—giving their partner a little more of a top-rope in the last moves and setting them up for swinging into the next pitch. The follower gets to the anchor and clips in. What a climb! They both lean back to laugh. Both anchor bolts break. They fall. Only that extra bolt on the next pitch holds, keeping them from dying, but all three bolts were shiny and brand new. Corrosion isn’t always visible, and there are a few different kinds of severe corrosion that result in scary failures like the one described above. These have been known for a long time in industries like construction and nuclear power, but it has only been in the last 20 years or so that we’ve recognized them in climbing anchors. These failures don’t require a lot of corrosion, just a very small amount. The two main types are Stress Corrosion Cracking (SCC) and Sulfur Stress Cracking (SSC), but there are others as well. For a number of reasons, these are really terrifying problems in climbing safety: they can happen very quickly without any easy-to- spot outward signs; they are difficult to predict; and they happen on stainless steels that climbers and route developers commonly think of as bomber. Like in any other part of climbing, assumptions can kill. Starting in the late 1990s, climbers started talking about this issue. The problem seemed particularly obvious in coastal climbing areas, but it began to crop up elsewhere as well. Companies were quietly adjusting the alloying content of their wedge bolts, scientific papers were being written, and developers were beginning to use glue-ins and titanium. And ultimately, the Union Internationale des Associations d’Alpinisme (UIAA) Safety Commission (SafeComm) started looking into the issue in a rigorous way. The UIAA is where the buck stops with global climbing safety. It is a union of climbing federations from 73 countries that works on things like mountain medicine, protecting climbing areas globally, organizing Ice Climbing World Cups, and standardizing training curricula and safe practices. It is where gear failure from all countries gets analyzed. It is where climbers, manufacturers, and labs come together to make climbing safer. As the national organization for climbers in America, the American Alpine Club is the U.S. representative to the UIAA. To address the SCC issue, the SafeComm worked for almost 15 years to develop a new Rock Anchor Standard that tests the complete anchor—UIAA123. In the summer of 2025, we updated it at our 50th anniversary meeting with guidance on welding. SCC starts with a pit on the surface of the material. This could be a small defect in the steel, damage caused by placing the bolt, or something left over from manufacturing. Pitting corrosion can also start the process. Pitting corrosion causes deepening pits to form in the surface and is typically fueled by the presence of chlorine. In all these types of corrosion, chlorine isn’t consumed, it is just something that facilitates the corrosion’s progress. That means it doesn’t take very much to make this happen—a high concentration, but not a large amount. Once there is a deep enough pit, the process changes—in some cases it will stop here, but in others, the corrosion will develop into SCC and a crack will begin to extend from the bottom of the pit. This crack drives forward through the shaft of the bolt via a complex mechanism that doesn’t cause the outside of the bolt to corrode. In a short time, the bolt could break with body weight but show little sign of this danger. Sulfur Stress Cracking (SSC) is similar in effect, but not in process. For now, we’ll focus on SCC. Stress Corrosion Cracking requires three things: a susceptible material, a suitable environment, and sufficient stress in the material. None of these things are quite as straight-forward as they seem and the rate of cracking can ... https://americanalpineclub.org/news/2025/8/14/guidebook-xvpolicy-spotlight
  • Carlo Traversi Sending The Big Island V15

    General News climbing
    1
    0 Votes
    1 Posts
    97 Views
    GrippedG
    The American climber adds another classic boulder to his tick list The post Carlo Traversi Sending The Big Island V15 appeared first on Gripped Magazine. https://gripped.com/video/carlo-traversi-sending-the-big-island-v15/
  • Snowboarders Ride Himalayan Peak of Evil

    General News climbing
    1
    0 Votes
    1 Posts
    96 Views
    GrippedG
    A new film just dropped documenting the second descent of the mountain Papsura The post Snowboarders Ride Himalayan Peak of Evil appeared first on Gripped Magazine. https://gripped.com/news/snowboarders-ride-himalayan-peak-of-evil/
  • Lee Sungsu Completes The Process V16

    General News climbing
    1
    0 Votes
    1 Posts
    104 Views
    GrippedG
    A couple days before Christmas, he made the third ascent of the Buttermilks line The post Lee Sungsu Completes The Process V16 appeared first on Gripped Magazine. https://gripped.com/news/lee-sungsu-completes-the-process-v16/
  • Do Not Go Outside To Cry by Kathy Karlo

    General News climbing climbingzine
    1
    0 Votes
    1 Posts
    103 Views
    ClimbingZineC
    I see it being used all around me to describe women, often by other women: badass. I have always considered it to have a good connotation, as it implies confidence with a splash of style. Diverse, strong-willed women deserve an empowering word that delivers a heavy compliment—one that says, “She’s got things under control.” The… https://climbingzine.com/do-not-go-outside-to-cry-by-kathy-karlo-2-2/