Skip to content

Dyneema Sling vs Belay Loop

Videos
1 1 109 1

Suggested topics


  • 0 Votes
    1 Posts
    41 Views
    GrippedG
    The first ascent of the northeast ridge of Ulvetanna by a five-person team in 2013 The post The Epic Story Behind Antarctica’s Longest Rock Climb appeared first on Gripped Magazine. https://gripped.com/profiles/the-epic-story-behind-antarcticas-longest-rock-climb/
  • 0 Votes
    1 Posts
    110 Views
    GrippedG
    There will be three stops in the United States and two in Canada in 2026 – don't miss the action! The post Here’s Where the North American Cup Series Is Going in 2026 appeared first on Gripped Magazine. https://gripped.com/indoor-climbing/heres-where-the-north-american-cup-series-is-going-in-2026/
  • Karakoram’s Eternal Flame Freed by Team

    General News climbing
    1
    0 Votes
    1 Posts
    98 Views
    GrippedG
    Four Germans made a team free ascent of the high-altitude 5.13 granite alpine route The post Karakoram’s Eternal Flame Freed by Team appeared first on Gripped Magazine. https://gripped.com/news/eternal-flame-on-trango-tower-fkkarakorams-eternal-flame-freed-by-teamarakorams-eternal-flame-freed-by-team-of-fourreed-by-team-of-four/
  • Guidebook XV—Policy Spotlight

    General News climbing
    1
    0 Votes
    1 Posts
    105 Views
    American Alpine ClubA
    Consider the following true story: It’s the mid-2000s and two friends are on a long, multi-pitch sport climb. They’re excited—it is the climbing vacation to paradise they’ve dreamt about. They’ve been on clean, hard limestone all week. They’re prepared and plenty experienced for this climb. The leader has reached a belay stance and is getting ready to bring up their partner. They are building an anchor on two shiny new bolts. As the leader flakes the rope, they see the first bolt on the next pitch is close, and they decide to clip the rope into it—giving their partner a little more of a top-rope in the last moves and setting them up for swinging into the next pitch. The follower gets to the anchor and clips in. What a climb! They both lean back to laugh. Both anchor bolts break. They fall. Only that extra bolt on the next pitch holds, keeping them from dying, but all three bolts were shiny and brand new. Corrosion isn’t always visible, and there are a few different kinds of severe corrosion that result in scary failures like the one described above. These have been known for a long time in industries like construction and nuclear power, but it has only been in the last 20 years or so that we’ve recognized them in climbing anchors. These failures don’t require a lot of corrosion, just a very small amount. The two main types are Stress Corrosion Cracking (SCC) and Sulfur Stress Cracking (SSC), but there are others as well. For a number of reasons, these are really terrifying problems in climbing safety: they can happen very quickly without any easy-to- spot outward signs; they are difficult to predict; and they happen on stainless steels that climbers and route developers commonly think of as bomber. Like in any other part of climbing, assumptions can kill. Starting in the late 1990s, climbers started talking about this issue. The problem seemed particularly obvious in coastal climbing areas, but it began to crop up elsewhere as well. Companies were quietly adjusting the alloying content of their wedge bolts, scientific papers were being written, and developers were beginning to use glue-ins and titanium. And ultimately, the Union Internationale des Associations d’Alpinisme (UIAA) Safety Commission (SafeComm) started looking into the issue in a rigorous way. The UIAA is where the buck stops with global climbing safety. It is a union of climbing federations from 73 countries that works on things like mountain medicine, protecting climbing areas globally, organizing Ice Climbing World Cups, and standardizing training curricula and safe practices. It is where gear failure from all countries gets analyzed. It is where climbers, manufacturers, and labs come together to make climbing safer. As the national organization for climbers in America, the American Alpine Club is the U.S. representative to the UIAA. To address the SCC issue, the SafeComm worked for almost 15 years to develop a new Rock Anchor Standard that tests the complete anchor—UIAA123. In the summer of 2025, we updated it at our 50th anniversary meeting with guidance on welding. SCC starts with a pit on the surface of the material. This could be a small defect in the steel, damage caused by placing the bolt, or something left over from manufacturing. Pitting corrosion can also start the process. Pitting corrosion causes deepening pits to form in the surface and is typically fueled by the presence of chlorine. In all these types of corrosion, chlorine isn’t consumed, it is just something that facilitates the corrosion’s progress. That means it doesn’t take very much to make this happen—a high concentration, but not a large amount. Once there is a deep enough pit, the process changes—in some cases it will stop here, but in others, the corrosion will develop into SCC and a crack will begin to extend from the bottom of the pit. This crack drives forward through the shaft of the bolt via a complex mechanism that doesn’t cause the outside of the bolt to corrode. In a short time, the bolt could break with body weight but show little sign of this danger. Sulfur Stress Cracking (SSC) is similar in effect, but not in process. For now, we’ll focus on SCC. Stress Corrosion Cracking requires three things: a susceptible material, a suitable environment, and sufficient stress in the material. None of these things are quite as straight-forward as they seem and the rate of cracking can ... https://americanalpineclub.org/news/2025/8/14/guidebook-xvpolicy-spotlight
  • 1 Votes
    1 Posts
    229 Views
    American Alpine ClubA
    Ice is a fickle medium that is hard to assess. This month we’re highlighting an accident report from ANAC 2023 involving a leader fall that was compounded by pulled protection. Though the climber was very experienced, this accident underlines that even as more people climb ice than ever before, it takes years of experience to accurately gauge conditions. Also, climate change is increasing the hazards of rockfall, avalanches, ice collapse, and generally warmer ice. Utah County Sheriff’s Search and Rescue was dispatched at 11:09 a.m. on December 26 to aid an ice climber who had fallen from the first pitch of Finger of Fate (3 pitches, WI4+) in Provo Canyon. The climber, Tim Thompson (29), was nearing the end of the first pitch when ice sheared from under his left foot. He wrote to ANAC that he was “pushed forward into my ice tools and my relaxed grip caused me to fall.” Thompson’s uppermost screw pulled out of the ice, causing him to fall a total of 50 feet. Utah County team members arrived and, with the help of the climbers already on scene, evaluated the ice conditions, established an equalized anchor with six screws at the base of the climb, and developed a plan to move the patient horizontally about 100 feet over steep, slippery terrain to a five-by-ten-foot ledge that was out of the rockfall and icefall area. Conditions were deteriorating, the ice was becoming less cohesive as temperatures rose, and rocks were starting to fall. A Department of Public Safety (DPS) helicopter crew did a reconnaissance of the ledge and determined that it would be a suitable place for a hoist operation. The patient was then short-hauled from the ledge to a nearby parking lot, where an ambulance was waiting. He was airlifted to a hospital and assessed to have two broken vertebrae, a broken elbow, torn ligaments in an elbow, and a badly broken left wrist. Warm conditions make ice climbing hazardous. Recalls Thompson: “The weather was warm the day before. Temps overnight were about 28°F for almost 10 or 12 hours and were hovering around 31°F or 32°F while climbing. We felt confident that the ice had had enough time to heal, and that as long as we climbed quickly, we were in no danger.” Running water, heat retained by the underlying rock, and even indirect solar radiation can prevent ice from refreezing. The warm temperatures also affected the quality of Thompson’s protection. He wrote to ANAC, “When I put in the last ice screw, the ice was really soft. Up until the last quarter of the route, the ice [had been] really healthy and the screw placements were really good. I got several really solid screws lower on the route, and the second-to-last one (the one that caught me) was in really bomber ice.” Thompson did well to place extra gear that he might have dismissed as unnecessary. Before the final section of the pitch, he says, “I remember pulling onto the ice after a ledge rest and deciding to step back down and place a high screw. I knew that would be a lot of protection, as the last screw was just below my feet. But if I had not placed this screw, I would have hit the deck from almost 100 feet up. Things could have been a lot worse.” Sources: Salt Lake County Sheriff’s Search and Rescue and Tim Thompson. Warm conditions make ice climbing hazardous. Pete Takeda, editor of Accidents in North American Climbing, and IMGA/AMGA Guide Jason Antin are back to explain the hazards ice climbers face in warm conditions, such as protection pulling, poor tool placements, and shearing crampons. Producers: Shane Johnson and Sierra McGivney; Videographer: Foster Denney; Editor: Sierra McGivney Location: Silver Plume Falls, Silver Plume, CO Over time an ice climber learns to gauge conditions and most importantly, when to go for it and when to back off. This is a long and experience-based learning curve. The biggest lesson is: If it doesn’t feel right, don’t do it. Whether a novice or an experienced ice climber, don’t factor luck into your decision-making. Utah guide Derek DeBruin’s flowchart is a handy tool to assess ice climbing decision-making on any given day: This flowchart can assist in managing hazards by helping determine the stability of the ice, the effectiveness of ice screw... https://americanalpineclub.org/news/2024/12/16/theprescription-december2024
  • Laura Rogora climbs Goldrake, 9a/+

    General News climbing
    1
    0 Votes
    1 Posts
    146 Views
    UK ClimbingU
    Laura Rogora has made the first female ascent of Goldrake, 9a/+, at Cornalba, Italy. https://www.ukclimbing.com/forums/t.php?n=775225
  • Fri Night Vid The North Face presents "Night Moves"

    General News climbing
    1
    0 Votes
    1 Posts
    187 Views
    UK ClimbingU
    This week's Friday Night Video, Night Moves, takes us back to 2019, where a strong team including Daniel Woods, Shawn Raboutou, Nina Williams, and Giuliano Cameroni head to Brazil to explore the climbing that the country has to offer. https://www.ukclimbing.com/forums/t.php?n=772601
  • 0 Votes
    1 Posts
    172 Views
    ClimbingZineC
    https://climbingzine.com/holding-on-by-letting-go-by-shara-zaia-volume-24-excerpt/