Skip to content

The Only Soft Catch video You Need to See | Ep.12

Videos
1 1 121 1

Suggested topics


  • 1 Votes
    1 Posts
    43 Views
    IFSCI
    https://www.youtube.com/watch?v=Z2SR6OmjTn4
  • Climber Does 12 5.12 Routes in 12 Hours

    General News climbing
    1
    0 Votes
    1 Posts
    53 Views
    GrippedG
    Greg Lee says farewell to Oregon by climbing 12 hard routes on the Bat Wall The post Climber Does 12 5.12 Routes in 12 Hours appeared first on Gripped Magazine. https://gripped.com/news/climber-does-12-5-12-routes-in-12-hours/
  • 0 Votes
    1 Posts
    64 Views
    GrippedG
    Flashed said they will continue with gym padding installations in the USA but will stop retail sales The post Canadian Climbing Company Stops USA Sales Due to Tariffs appeared first on Gripped Magazine. https://gripped.com/news/canadian-climbing-company-stops-usa-sales-due-to-tariffs/
  • 0 Votes
    1 Posts
    125 Views
    UK ClimbingU
    In a first for the indoor climbing industry, the Association of British Climbing Walls (ABC) has launched a climbing wall accreditation programme, with support from the British Mountaineering Council (BMC) and Sport England, to recognise and dr... https://www.ukclimbing.com/news/press/association_of_british_climbing_walls_launches_pioneering_new_accreditation_progr-16369
  • The Prescription—Quickdraw Unclipped

    General News climbing
    2
    2 Votes
    2 Posts
    165 Views
    American Alpine ClubA
    My climbing partner (31) and I, Alec Gilmore (29), went sport climbing at Pilot Mountain State Park in March 2023. I have ten years of climbing experience, and my partner has six, and we both take pride in our risk assessment and careful approach. The first route we planned to climb was occupied, so we found a nearby route that neither of us had previously tried. We incorrectly identified the route as a 5.7. The route was actually Goodness Gracious (5.10a). I quickly realized the route was harder, but I had previously led up to 5.11 here, so I went on and clipped three bolts and then hung to work out the crux. It involved throwing a high heel hook and manteling onto an awkward bulge. I got partially over the bulge and needed to make one more move but couldn't find a good handhold. I ended up falling off. Instead of stopping, I hit the ground after falling 20 feet. Both feet landed on a flat rock step on the main hiking trail. My belayer took up enough slack so that the rope started to catch right as my feet hit. After lying on the ground, overcoming the initial shock and pain, I realized that the alpine quickdraw that I had clipped into the third bolt was still clipped to the rope. Somehow as I was wrestling with the move, it had come unclipped from the hanger. I was wearing a helmet, but fortunately I did not hit my head or back during the fall. Park staffers were alerted by a nearby climber, and in about 30 to 45 minutes a team of park employees, other climbers, and volunteers arrived and loaded me onto a transport basket. For the next hour and a half, they carried me back up to the summit, where an ambulance was waiting. At one point they rigged a rope and hauled me up a steep hill to shorten the journey. At the hospital, X-rays showed I had fractured both heel bones. One of the fractures was bad enough to require surgery, and I received a plate and four screws. The first mistake we made was not being sure of what route we were climbing. We had recently been trying routes we hadn't previously climbed. The route I fell from was on my to-do list, but the plan was to warm up with an easier route. The second mistake was the positioning of the carabiner on the bolt hanger. I knew that it was possible for a carabiner to unclip from a bolt hanger if it's pulled up against the wall in a certain way. I try to keep the spine of the carabiner pointed in the direction I'm climbing. When I was clipping the third bolt, I thought I would climb toward the left side of the bulge. The line turned out to go right. Somehow, as I wrestled with the move, the quickdraw came unclipped. Though rare, carabiners can come unclipped from bolt hangers. A few things to consider: The hanger-clipping-end carabiner should be loose in the sling, never held by a rubber keeper. Both carabiners on a quickdraw should be oriented with the gates facing the same direction. As Alec mentions, quickdraws should be clipped so the gates are oriented away from the direction of travel.   The direction in which one clips also can be a factor in certain cases. Clipping the opposite direction from the angle of the carabiner hole will minimize the possibility of the carabiner levering against the hanger and unclipping. Almost all plate-style bolt hangers have the clipping section on the left side of the hanger. So, the ideal clipping direction would be from left to right. Other factors (like the ones mentioned above) may be more important in a given situation, but when you have a choice, this is the preferred method. For even more security, a safer play is to flip the gate so it opens downwards. Better yet, if the clip is critical, i.e. before or after a runout, use a locking carabiner on the hanger end of the quickdraw. (Source: Alec Gilmore and the Editors.) Under some circumstances, quickdraws can unclip themselves. Editor of Accidents in North American Climbing, Pete Takeda, and IMGA/AMGA Guide Jason Antin, are back to show you that clipping bolts isn’t always as simple as it seems. Dive in to get the accident analysis informing these takeaways, and some quick tips on how to mitigate risk when clipping bolt hangers. Credits: Pete Takeda, Editor of Accidents in North American Climbing, and Jason Antin @jasonantin, IFMGA/AMGA Certified Mountain Guide; Producer: Shane Johnson; Cinematographer or Videographer: Foster Denney; Editor: Sierra McGivney; Location: Accessibility Crag, Clear Creek Canyon, CO; Presenting Sponsor: Rocky Talkie @rockytalkies. https://americanalpineclub.org/news/2024/11/18/the-prescription-november24
  • Ray’s Red Truck by Roy McClenahan

    General News climbing climbingzine
    1
    0 Votes
    1 Posts
    108 Views
    ClimbingZineC
    In the rich caravan of climbers whom we meet at the crags, people come and go. Some, like the flowing of mountain streams, make a daily ritual of their appearance on the stone. Others show up every weekend, while outliers make the scene only once a month, or less. Climbers who’ve shared the bonds of… https://climbingzine.com/rays-red-truck-by-roy-mcclenahan/
  • Remembering John Middendorf

    General News climbing
    1
    0 Votes
    1 Posts
    189 Views
    American Alpine ClubA
    We are deeply saddened by the loss of the incredible climber, mountaineer, inventor, writer, and historian of climbing gear John Middendorf. John (nicknamed the "Deuce") was a true friend to the American Alpine Club, and his insatiable curiosity and kindness made an impression on everyone he met.  Although his contributions to climbing are many, some in particular changed the sport forever. John’s ascent of the East Face of Great Trango Tower in 1992 with Xaver Bongard epitomized his elite climbing skill—The Grand Voyage was a performance of a lifetime on one of the biggest and remotest big walls in the world, and was one of the first Grade VII climbs. John also put up new Grade VI routes on Half Dome and El Cap, along with many first ascents in Zion National Park. He was otherwise a prolific contributor to the American Alpine Journal with exploratory climbs all across the world. John, an engineer and inventor, started a hardware company, A5 Adventures, in 1986. His innovations in portaledge design, as well as Birdbeak pitons, aiders, haul bags, and other gear, unequivocally changed the big-wall game. He sold A5 to The North Face in 1997. His 1994 book Big Walls, co-authored with John Long, was the crucial reference for many wall-climbing novices. But besides being a great man in climbing, he also was a dear friend of the AAC. We deeply appreciate the generosity and knowledge he shared with the Club, his support of the AAC Library, and his contributions to the Legacy Series and the 2023 Cutting Edge Grant.  The AAC’s Library Director, Katie Sauter, reflected: “[John’s] insatiable curiosity led him to research so many avenues of climbing, often sending me questions about the most obscure references. He was very knowledgeable and wrote blog posts about a wide variety of topics pertaining to climbing history and the evolution of gear. He was generous with his time, and when he was visiting, he'd identify historic climbing gear for our collections. His enthusiasm was infectious. He was so interested in how gear was made that he even wanted to test the composition of some of our historic pitons to see what kind of metal was used.” The AAC will truly miss John Middendorf, and our thoughts are with his wife, Jeni, his children, and his other family and friends as they grieve and celebrate him. https://americanalpineclub.org/news/2024/6/25/remembering-john-middendorf
  • These Boulders in Sardinia Are Otherworldly

    General News climbing
    1
    0 Votes
    1 Posts
    103 Views
    GrippedG
    https://gripped.com/news/these-boulders-in-sardinia-are-otherworldly/