Skip to content

New Big Wall Rock Climb is 35 Pitches Long

General News
1 1 134 1

Suggested topics


  • Safer Than Socks in Your Hat

    General News climbing
    1
    0 Votes
    1 Posts
    13 Views
    American Alpine ClubA
    Less than a thousand feet from the summit, on the north face of the Eiger, Gaston Rébuffat hooked a finger into a piton, left behind from a previous ascent. The night before, as they bivvied, Rébuffat was surprised to find himself sleepless, with a sense of bad omens. “The stars seemed so near that you could touch them, and the Milky Way shone with sinister brightness,” he wrote in his book Starlight and Storm. On that July day in 1952, their surroundings did prove sinister. Stuck behind several slower parties and faced with warming temperatures, Rébuffat’s team had to inch their way across the tedious traverses that guarded the summit, often taking alternate routes in order to avoid bottlenecks. As luck would have it, Rébuffat hooked that piton at the exact moment a thunderous crack boomed from above. A massive rock came tumbling down, bursting and splitting into pieces that struck Rébuffat on the head. “But the finger hooked through the piton still held. It was very painful, and felt as if it had been sawn through.... A little blood fell from my cap and reddened the snow-flecked rock.” Yet, with his head aching and the motivation drained out of him, Rébuffat carried on. Rumor has it that Rébuffat had stuffed his hat with socks, as was the custom at the time when climbing in areas with rockfall danger, and some credit this habit for saving his life. Well, that and the piton. Without the padding of his rudimentary “helmet,” Rébuffat might not have become the first man to climb all six of the great north faces of the Alps. Since then, it’s fair to say climbing helmets have undergone an evolution. The history of head protection in climbing starts earlier than Gaston Rébuffat’s injury on the Eiger. There was a parallel evolution, but staggered, between those climbing in the mountains and those exploring underground in caves. In 1936, the trailblazing French caver Pierre Chevalier reported, “Helmets are beginning to be considered essential in sport caving.” However, during this period, and until around 1950, climbers aboveground were still wearing wool berets as the standard headwear. In 1948, Chevalier’s Escalades Souterraines (Subterranean Climbers) was published. It was one of the seminal works in early caving. In the early 1950s felt hats became the norm. When there was risk of rockfall, they would occasionally be stuffed with socks or newspaper. This is where Rébuffat’s story takes the stage. Four years later, in 1956, the ninth edition of Accidents in North American Mountaineering (now Accidents in North American Climbing) already showed an increasing preference for protective headgear. In comments preceding the accident reports, the editors wrote: “Another point that should be re-emphasized is the desirability of wearing a plastic helmet to protect the head from falling rock in areas where this danger is present. This has become a standard practice for some rock climbers in the Yosemite area.” As helmets for other sports evolved, so too did climbing helmets. In 1954, Amisano Gino Valenza (AGV) produced the first fiberglass motorcycle helmet. It was used by many climbers until climbing-specific models became available. Walter Bonatti knew helmets were critical. Describing his last ascent of the north face of the Matterhorn, done solo in winter, he wrote: Again once more, I look to lighten my pack to move more rapidly. I toss food, two étriers, some pitons. I am tempted to get rid of my helmet as well, the glorious plastic helmet that, for four years, accompanied me on the most difficult enterprises. But after an instant of hesitation, I stay my hand and hold the helmet to my chest. I caress its bumps as if they were wounds: each one of them corresponding to a rock, fallen off Mont Blanc, the Andes, so many other mountains. I placed it back in my pack. It’s clear Bonatti recognized how many times the helmet had prevented injury. Despite the weight of early helmets, anyone who had their life saved by one would appreciate their value. The new, lighter fiberglass motorcycle helmet and its growing use by serious climbers spurred the creation of helmets designed for climbers. Sporthaus Schuster was one of the earliest to come... https://americanalpineclub.org/news/2026/2/12/safer-than-socks-in-your-hat
  • 0 Votes
    1 Posts
    55 Views
    GrippedG
    The Swiss duo repeated test-piece routes and opened bold new mixed lines during their historic trip The post Remembering Ueli Steck and Simon Anthamatten’s Epic Visit to the Rockies appeared first on Gripped Magazine. https://gripped.com/profiles/remembering-ueli-steck-and-simon-anthamattens-epic-visit-to-the-rockies/
  • Guidebook XV—Policy Spotlight

    General News climbing
    1
    0 Votes
    1 Posts
    88 Views
    American Alpine ClubA
    Consider the following true story: It’s the mid-2000s and two friends are on a long, multi-pitch sport climb. They’re excited—it is the climbing vacation to paradise they’ve dreamt about. They’ve been on clean, hard limestone all week. They’re prepared and plenty experienced for this climb. The leader has reached a belay stance and is getting ready to bring up their partner. They are building an anchor on two shiny new bolts. As the leader flakes the rope, they see the first bolt on the next pitch is close, and they decide to clip the rope into it—giving their partner a little more of a top-rope in the last moves and setting them up for swinging into the next pitch. The follower gets to the anchor and clips in. What a climb! They both lean back to laugh. Both anchor bolts break. They fall. Only that extra bolt on the next pitch holds, keeping them from dying, but all three bolts were shiny and brand new. Corrosion isn’t always visible, and there are a few different kinds of severe corrosion that result in scary failures like the one described above. These have been known for a long time in industries like construction and nuclear power, but it has only been in the last 20 years or so that we’ve recognized them in climbing anchors. These failures don’t require a lot of corrosion, just a very small amount. The two main types are Stress Corrosion Cracking (SCC) and Sulfur Stress Cracking (SSC), but there are others as well. For a number of reasons, these are really terrifying problems in climbing safety: they can happen very quickly without any easy-to- spot outward signs; they are difficult to predict; and they happen on stainless steels that climbers and route developers commonly think of as bomber. Like in any other part of climbing, assumptions can kill. Starting in the late 1990s, climbers started talking about this issue. The problem seemed particularly obvious in coastal climbing areas, but it began to crop up elsewhere as well. Companies were quietly adjusting the alloying content of their wedge bolts, scientific papers were being written, and developers were beginning to use glue-ins and titanium. And ultimately, the Union Internationale des Associations d’Alpinisme (UIAA) Safety Commission (SafeComm) started looking into the issue in a rigorous way. The UIAA is where the buck stops with global climbing safety. It is a union of climbing federations from 73 countries that works on things like mountain medicine, protecting climbing areas globally, organizing Ice Climbing World Cups, and standardizing training curricula and safe practices. It is where gear failure from all countries gets analyzed. It is where climbers, manufacturers, and labs come together to make climbing safer. As the national organization for climbers in America, the American Alpine Club is the U.S. representative to the UIAA. To address the SCC issue, the SafeComm worked for almost 15 years to develop a new Rock Anchor Standard that tests the complete anchor—UIAA123. In the summer of 2025, we updated it at our 50th anniversary meeting with guidance on welding. SCC starts with a pit on the surface of the material. This could be a small defect in the steel, damage caused by placing the bolt, or something left over from manufacturing. Pitting corrosion can also start the process. Pitting corrosion causes deepening pits to form in the surface and is typically fueled by the presence of chlorine. In all these types of corrosion, chlorine isn’t consumed, it is just something that facilitates the corrosion’s progress. That means it doesn’t take very much to make this happen—a high concentration, but not a large amount. Once there is a deep enough pit, the process changes—in some cases it will stop here, but in others, the corrosion will develop into SCC and a crack will begin to extend from the bottom of the pit. This crack drives forward through the shaft of the bolt via a complex mechanism that doesn’t cause the outside of the bolt to corrode. In a short time, the bolt could break with body weight but show little sign of this danger. Sulfur Stress Cracking (SSC) is similar in effect, but not in process. For now, we’ll focus on SCC. Stress Corrosion Cracking requires three things: a susceptible material, a suitable environment, and sufficient stress in the material. None of these things are quite as straight-forward as they seem and the rate of cracking can ... https://americanalpineclub.org/news/2025/8/14/guidebook-xvpolicy-spotlight
  • What to bring on a bouldering holiday

    Videos climbing
    1
    0 Votes
    1 Posts
    192 Views
    EpicTVE
    https://www.youtube.com/watch?v=szGJmi3B_9s
  • Will Gadd: Keeping your hands warm, Part 1

    General News climbing alpinesavvy
    1
    1 Votes
    1 Posts
    115 Views
    AlpineSavvyA
    Canadian ice climbing expert Will Gadd shares some of his top tips for keeping your hands (and feet) warm. This is part one of a series of three articles. https://www.alpinesavvy.com/blog/will-gadd-keeping-your-hands-warm-part-1
  • Men's Boulder semi-final | Prague 2024

    Videos climbing ifsc
    1
    0 Votes
    1 Posts
    126 Views
    IFSCI
    https://www.youtube.com/watch?v=SmDg72MvGl8
  • Katie Lamb Scales Equanimity V15

    General News climbing
    1
    0 Votes
    1 Posts
    181 Views
    GrippedG
    Jimmy Webb called the problem a "contender for the hardest technical boulder in the world" The post Katie Lamb Scales Equanimity V15 appeared first on Gripped Magazine. https://gripped.com/news/katie-lamb-scales-equanimity-v15/
  • Angus Kille Onsights Spicy Trad in Ireland

    General News climbing
    1
    0 Votes
    1 Posts
    166 Views
    GrippedG
    A new video just dropped featuring a bold ground-up push on a gear classic The post Angus Kille Onsights Spicy Trad in Ireland appeared first on Gripped Magazine. https://gripped.com/news/angus-kille-onsights-spicy-trad-in-ireland/