Skip to content

Old School Zine Bundle Just Posted (Volumes 12 – 17)

General News

Suggested topics


  • 0 Votes
    1 Posts
    1 Views
    American Alpine ClubA
    Climbing is a powerful force that connects us. Even when climbing takes a backseat in our lives, we are still connected to the people we have partnered with, the places we have climbed, and the impact we have had. Today, we celebrate the 100th birthday of one of our members, Bill Atkinson. Bill started climbing in the Shawangunks in the late 50's and joined the American Alpine Club in 1978. He was the New England Section Chair and was awarded the Angelo Heilprin Citation Award in 2006 for exemplary service to the Club. He is one of our oldest members and has been a member of the American Alpine Club for 47 years. Happiest centennial to you, Bill! Bill, your presence in our climbing world has been productive and prolific—and your life has been the same! Your postings have always been inspiring. Thanks for doing all of those. Some segments should be required before being granted membership in the AAC! We never climbed together – except at the Annual AAC New England Section and some Annual Dinners. That is to say, climbing up to the bar. I'm fifteen years younger, so you were out there ahead of me. But I have you beat on one score! I climbed Mt. Sir Donald via the same route you took, but back in 1962. I was also in the Bugaboos that summer. You'll be getting a lot of these postings, so I'll keep this short. Thanks again for all you've done for our world. Happy Century! Hang around for another 15 so you can help me celebrate mine. –Jed Williamson Happy Birthday, Bill, You are one very special person, a thoughtful, helpful climber with such an important history of climbing in New England. I respect you and your contributions to the AAC and climbing. Hats off to you, young man. I salute you for your many contributions. Thank you, and special wishes every day. Happy Birthday, Bruce Franks Rick Merrit celebrates Bill's Birthday by remembering the times they connected through climbing… Bill was a great section leader as I became more involved in the AAC. He worked hard to recruit and recognize new members through our section's formal dinners. I remember climbing with him on White Horse Ledge in North Conway when he was in his 80s. I also remember hiking with Bill and his friend Dee Molinar when the ABD was at Smith Rock. Warm regards to Bill, Rick Merritt I mainly know Bill through the AAC, specifically the New England chapter, which Bill energetically chaired for many years. We all looked forward to the wonderful black tie annual dinners held in the old Tufts mansion in Weston, MA, that he so carefully organized. I always enjoyed listening to Bill's extraordinary life experiences, like when he served as a radar navigator in a B52 in the Pacific during WWII, or marveling at his many fascinating inventions and creations, like the beautiful chess boards he crafted and, of course, his amazing climbing career. Bill remained extremely active as a climber long after most of his peers retired, and I remember he climbed the Black Dike when he was 80, I think! That may have been the oldest ascent ever! I've always appreciated Bill's kind, soft-spoken character and the interest he always showed in others. Bill is a true Renaissance man, and I feel fortunate to know him. Happy 100th birthday, Bill! What a milestone! –Mark Richey https://americanalpineclub.org/news/2025/1/13/celebrating-aac-member-bill-atkinsons-100th-birthday
  • 0 Votes
    1 Posts
    6 Views
    aslankemalaslan@mastodon.onlineA
    第15回全国高等学校選抜スポーツクライミング選手権大会 男女予選#bouldering #lead #climbing #sport https://www.youtube.com/watch?v=yNaCIKYDnaU
  • 0 Votes
    1 Posts
    5 Views
    GrippedG
    After suffering a multitude of injuries—including to his head, chest, and back—and with medical bills piling up, Kevin Cooper could use financial help from the climbing community The post Alpinist Kevin Cooper Injured in Scaffolding Fall: How You Can Help appeared first on Gripped Magazine. https://gripped.com/profiles/alpinist-kevin-cooper-injured-in-scaffolding-fall-how-you-can-help/
  • 0 Votes
    1 Posts
    11 Views
    UK ClimbingU
    'The Brawl' is the Font's largest annual event attracting competitors from all over the UK - even some from Europe. This year, two Team GB Olympians took the win in Wandsworth. The 2024 Tenzing Brawl on the Wall at The Font Wandsworth in south-west London delivered all the drama and world-class climbing fans could ... https://www.ukclimbing.com/forums/t.php?n=776601
  • The Prescription—Quickdraw Unclipped

    General News
    2
    2 Votes
    2 Posts
    24 Views
    American Alpine ClubA
    My climbing partner (31) and I, Alec Gilmore (29), went sport climbing at Pilot Mountain State Park in March 2023. I have ten years of climbing experience, and my partner has six, and we both take pride in our risk assessment and careful approach. The first route we planned to climb was occupied, so we found a nearby route that neither of us had previously tried. We incorrectly identified the route as a 5.7. The route was actually Goodness Gracious (5.10a). I quickly realized the route was harder, but I had previously led up to 5.11 here, so I went on and clipped three bolts and then hung to work out the crux. It involved throwing a high heel hook and manteling onto an awkward bulge. I got partially over the bulge and needed to make one more move but couldn't find a good handhold. I ended up falling off. Instead of stopping, I hit the ground after falling 20 feet. Both feet landed on a flat rock step on the main hiking trail. My belayer took up enough slack so that the rope started to catch right as my feet hit. After lying on the ground, overcoming the initial shock and pain, I realized that the alpine quickdraw that I had clipped into the third bolt was still clipped to the rope. Somehow as I was wrestling with the move, it had come unclipped from the hanger. I was wearing a helmet, but fortunately I did not hit my head or back during the fall. Park staffers were alerted by a nearby climber, and in about 30 to 45 minutes a team of park employees, other climbers, and volunteers arrived and loaded me onto a transport basket. For the next hour and a half, they carried me back up to the summit, where an ambulance was waiting. At one point they rigged a rope and hauled me up a steep hill to shorten the journey. At the hospital, X-rays showed I had fractured both heel bones. One of the fractures was bad enough to require surgery, and I received a plate and four screws. The first mistake we made was not being sure of what route we were climbing. We had recently been trying routes we hadn't previously climbed. The route I fell from was on my to-do list, but the plan was to warm up with an easier route. The second mistake was the positioning of the carabiner on the bolt hanger. I knew that it was possible for a carabiner to unclip from a bolt hanger if it's pulled up against the wall in a certain way. I try to keep the spine of the carabiner pointed in the direction I'm climbing. When I was clipping the third bolt, I thought I would climb toward the left side of the bulge. The line turned out to go right. Somehow, as I wrestled with the move, the quickdraw came unclipped. Though rare, carabiners can come unclipped from bolt hangers. A few things to consider: The hanger-clipping-end carabiner should be loose in the sling, never held by a rubber keeper. Both carabiners on a quickdraw should be oriented with the gates facing the same direction. As Alec mentions, quickdraws should be clipped so the gates are oriented away from the direction of travel.   The direction in which one clips also can be a factor in certain cases. Clipping the opposite direction from the angle of the carabiner hole will minimize the possibility of the carabiner levering against the hanger and unclipping. Almost all plate-style bolt hangers have the clipping section on the left side of the hanger. So, the ideal clipping direction would be from left to right. Other factors (like the ones mentioned above) may be more important in a given situation, but when you have a choice, this is the preferred method. For even more security, a safer play is to flip the gate so it opens downwards. Better yet, if the clip is critical, i.e. before or after a runout, use a locking carabiner on the hanger end of the quickdraw. (Source: Alec Gilmore and the Editors.) Under some circumstances, quickdraws can unclip themselves. Editor of Accidents in North American Climbing, Pete Takeda, and IMGA/AMGA Guide Jason Antin, are back to show you that clipping bolts isn’t always as simple as it seems. Dive in to get the accident analysis informing these takeaways, and some quick tips on how to mitigate risk when clipping bolt hangers. Credits: Pete Takeda, Editor of Accidents in North American Climbing, and Jason Antin @jasonantin, IFMGA/AMGA Certified Mountain Guide; Producer: Shane Johnson; Cinematographer or Videographer: Foster Denney; Editor: Sierra McGivney; Location: Accessibility Crag, Clear Creek Canyon, CO; Presenting Sponsor: Rocky Talkie @rockytalkies. https://americanalpineclub.org/news/2024/11/18/the-prescription-november24
  • A V17 Project in New York? Check it Out

    General News
    1
    0 Votes
    1 Posts
    15 Views
    GrippedG
    Could this be the first V17 on America's east coast? Watch a new video that just dropped about the problem The post A V17 Project in New York? Check it Out appeared first on Gripped Magazine. https://gripped.com/profiles/a-v17-project-in-new-york-check-it-out/
  • Don't use for life support!

    Videos
    1
    0 Votes
    1 Posts
    18 Views
    HowNOT2H
    https://www.youtube.com/watch?v=ONssvR2K6Vg
  • 0 Votes
    1 Posts
    10 Views
    climbingC
    https://www.climbing.com/competition/olympics/how-dangerous-is-sport-climbing/