Skip to content

The Arc’teryx Beta SL Jacket: A Review

General News

Suggested topics


  • 0 Votes
    1 Posts
    29 Views
    climber-magazineC
    First out of the traps for 2025 is mellowclimbing with a film of Nathaniel Coleman making the first ascent of No One Mourns the Wicked (V17/Font 9A) at Thunder Ridge, Colorado. https://www.climber.co.uk/news/coleman-makes-first-ascent-of-no-one-mourns-the-wicked-v17-font-9a/
  • Sterling Prusiks

    Videos
    1
    0 Votes
    1 Posts
    9 Views
    HowNOT2H
    https://www.youtube.com/watch?v=jPDJEAtQe0E
  • The Prescription—Quickdraw Unclipped

    General News
    2
    2 Votes
    2 Posts
    24 Views
    American Alpine ClubA
    My climbing partner (31) and I, Alec Gilmore (29), went sport climbing at Pilot Mountain State Park in March 2023. I have ten years of climbing experience, and my partner has six, and we both take pride in our risk assessment and careful approach. The first route we planned to climb was occupied, so we found a nearby route that neither of us had previously tried. We incorrectly identified the route as a 5.7. The route was actually Goodness Gracious (5.10a). I quickly realized the route was harder, but I had previously led up to 5.11 here, so I went on and clipped three bolts and then hung to work out the crux. It involved throwing a high heel hook and manteling onto an awkward bulge. I got partially over the bulge and needed to make one more move but couldn't find a good handhold. I ended up falling off. Instead of stopping, I hit the ground after falling 20 feet. Both feet landed on a flat rock step on the main hiking trail. My belayer took up enough slack so that the rope started to catch right as my feet hit. After lying on the ground, overcoming the initial shock and pain, I realized that the alpine quickdraw that I had clipped into the third bolt was still clipped to the rope. Somehow as I was wrestling with the move, it had come unclipped from the hanger. I was wearing a helmet, but fortunately I did not hit my head or back during the fall. Park staffers were alerted by a nearby climber, and in about 30 to 45 minutes a team of park employees, other climbers, and volunteers arrived and loaded me onto a transport basket. For the next hour and a half, they carried me back up to the summit, where an ambulance was waiting. At one point they rigged a rope and hauled me up a steep hill to shorten the journey. At the hospital, X-rays showed I had fractured both heel bones. One of the fractures was bad enough to require surgery, and I received a plate and four screws. The first mistake we made was not being sure of what route we were climbing. We had recently been trying routes we hadn't previously climbed. The route I fell from was on my to-do list, but the plan was to warm up with an easier route. The second mistake was the positioning of the carabiner on the bolt hanger. I knew that it was possible for a carabiner to unclip from a bolt hanger if it's pulled up against the wall in a certain way. I try to keep the spine of the carabiner pointed in the direction I'm climbing. When I was clipping the third bolt, I thought I would climb toward the left side of the bulge. The line turned out to go right. Somehow, as I wrestled with the move, the quickdraw came unclipped. Though rare, carabiners can come unclipped from bolt hangers. A few things to consider: The hanger-clipping-end carabiner should be loose in the sling, never held by a rubber keeper. Both carabiners on a quickdraw should be oriented with the gates facing the same direction. As Alec mentions, quickdraws should be clipped so the gates are oriented away from the direction of travel.   The direction in which one clips also can be a factor in certain cases. Clipping the opposite direction from the angle of the carabiner hole will minimize the possibility of the carabiner levering against the hanger and unclipping. Almost all plate-style bolt hangers have the clipping section on the left side of the hanger. So, the ideal clipping direction would be from left to right. Other factors (like the ones mentioned above) may be more important in a given situation, but when you have a choice, this is the preferred method. For even more security, a safer play is to flip the gate so it opens downwards. Better yet, if the clip is critical, i.e. before or after a runout, use a locking carabiner on the hanger end of the quickdraw. (Source: Alec Gilmore and the Editors.) Under some circumstances, quickdraws can unclip themselves. Editor of Accidents in North American Climbing, Pete Takeda, and IMGA/AMGA Guide Jason Antin, are back to show you that clipping bolts isn’t always as simple as it seems. Dive in to get the accident analysis informing these takeaways, and some quick tips on how to mitigate risk when clipping bolt hangers. Credits: Pete Takeda, Editor of Accidents in North American Climbing, and Jason Antin @jasonantin, IFMGA/AMGA Certified Mountain Guide; Producer: Shane Johnson; Cinematographer or Videographer: Foster Denney; Editor: Sierra McGivney; Location: Accessibility Crag, Clear Creek Canyon, CO; Presenting Sponsor: Rocky Talkie @rockytalkies. https://americanalpineclub.org/news/2024/11/18/the-prescription-november24
  • 0 Votes
    1 Posts
    11 Views
    climbingC
    Armando Menocal, a Cuban-American civil rights lawyer and climber, dedicated decades of his life to ensuring the sport remained accessible. https://www.climbing.com/people/remembering-armando-menocal/
  • New Jim Pope E9 and Grit Repeats

    General News
    1
    0 Votes
    1 Posts
    41 Views
    climber-magazineC
    https://www.climber.co.uk/news/new-jim-pope-e9-and-grit-repeats/
  • 0 Votes
    7 Posts
    38 Views
    N
    I’m a beginner climber and I got Evolv Shamans in my street size a few weeks ago since I read good reviews about them and I got them pretty cheap as they were in the discounted section of my local climbing shop, but only in that size. They’ve been great at allowing me to stand on small edges and get better height on my toes due to the thick rand, but they hurt like hell to wear, making the benefits I gain from using them somewhat moot, as I’m not able to climb and improve as much as I’d like to. I’ve been wearing them around the house in addition to the gym in the hopes of breaking them in quicker (I’ve had to wear plastic bags on my feet to prevent blisters on my heels and toes from excessive friction) and I noticed they don’t really seem to have broken in that much and still hurt my toes a lot (especially the tops of my big toes), so I’d like some recommendations for the next pair that I get. I have Morton’s toe/Greek feet and my feet are probably wider and less-arched than average. I’d like to get a more comfortable pair for long gym sessions, so I think I’d prefer lace-up shoes in the future. I’ve narrowed my choices down to the Scarpa Veloce L and the Ocún Advancer LU, both of which are lace-up, apparently suited for Greek feet, and are vegan. I’d appreciate some comparisons if people have experience with them, or if you have recommendations for other shoes that might suit my criteria better, please share them too!
  • How much do you downsize? #climbingshoes

    Videos
    1
    0 Votes
    1 Posts
    15 Views
    EpicTVE
    https://www.youtube.com/watch?v=NFcW-maEg8c
  • A Research Grant Report

    General News
    1
    0 Votes
    1 Posts
    21 Views
    American Alpine ClubA
    https://ingakindstedt.weebly.com/publications--abstracts.html